Buttons, lights, and vibrationsUpdated 24 minutes ago
The SpeakON device communicates through its indicator light and vibration patterns. Here's what each state means.
Device components
· Power button — on the back. Powers on/off and performs a factory reset.
· Record button — on the front. Starts and stops recording.
· Indicator light — on the front. Shows device status through color and flash patterns.
· Charging port — USB-C, on the top edge.
Power
Action | How to | Light | Vibration |
Power on | Hold Power button 2s | Blue solid for 3s, then off | 1 long |
Power off | Hold Power button 2s | Off | 1 long |
Bluetooth
State | Light | Vibration |
Waiting for connection (standby) | Off | None |
Connected (paired) | Blue flashes 3× quickly, then off | 1 short |
Connection lost | Off | None |
The indicator light turns off in standby to conserve power, but Bluetooth stays active and discoverable. The device reconnects automatically when back in range.
Recording
Action | How to | Light | Vibration |
Start recording | Hold Record button | Green solid | 1 short |
Stop recording | Release Record button | Off | None |
5-minute limit reached | Automatic | Green → Red flashes 3×, then off | 1 long |
Storage full | Press Record (when full) | Red solid (while pressed) | 2 cycles of rapid short |
Battery
State | Light | Vibration |
Low battery (≤10%) | Red flashes slowly | None |
Critical battery auto-shutdown (≤1%) | Red flashes 3× quickly, then off | None |
Charging
State | Light | Vibration |
Charging (below 100%) | Green flashes slowly | None |
Fully charged (100%) | Green solid (until unplugged) | None |
Factory reset
Action | How to | Light | Vibration |
Factory reset | Hold Power button 10s | Red and blue alternate 3×, then off | 2 long |