SpeakON V1-M — Device ManualUpdated 24 minutes ago
Device components
· Power button — back of device. Powers on/off; hold 10s for factory reset.
· Record button — front of device. Press and hold to record; release to stop.
· Indicator light — front of device. Shows status via color and flash patterns.
· Charging port — USB-C, top edge.
1. Download the app
Search "SpeakON" in the App Store. If already installed, update to the latest version before pairing.
2. Power on / off
Power on: Hold the Power button for 2 seconds. Blue light stays solid for 3 seconds then turns off. One long vibration.
Power off: Hold the Power button for 2 seconds. Light turns off. One long vibration.
3. Bluetooth pairing
Turn on the device. Open the SpeakON app, go to Account > Device, and tap Add Device.
Always pair through the SpeakON app — not from your iPhone's Bluetooth settings.
4. Recording
Start: Press and hold the Record button. Green light stays solid. One short vibration.
Stop: Release the button. Green light turns off. Recording saves automatically.
5-minute limit: Recording stops automatically. Green changes to red flashing 3 times. Press again to continue.
5. Storage full
Solid red light + rapid vibrations when pressing Record = storage full. Sync with the app to clear space.
6. Charging
Connect via USB-C. Standard 5V charger. Under 1.5 hours from empty. Flashing green = charging. Solid green = full.
7. Battery warnings
≤10%: Red flashes slowly. ≤1%: Red flashes 3× quickly, then device shuts off.
8. Factory reset
Hold Power button for 10 seconds. Red and blue lights alternate 3 times. Two long vibrations. All pairing data erased.
Your SpeakON account is not affected by a factory reset.
Quick reference
State | Trigger | Light | Vibration |
Power on | Hold Power 2s | Blue solid 3s, then off | 1 long |
Power off | Hold Power 2s | Off | 1 long |
Bluetooth paired | Complete pairing in app | Blue flashes 3×, then off | 1 short |
Start recording | Hold Record | Green solid | 1 short |
Stop recording | Release Record | Off | — |
Max recording (5 min) | Auto | Green → Red flashes 3×, then off | 1 long |
Storage full | Press Record (full) | Red solid (while pressed) | 2 cycles rapid short |
Charging | Connect charger | Green flashes slowly | — |
Fully charged | — | Green solid | — |
Low battery ≤10% | Auto | Red flashes slowly | — |
Auto-shutdown ≤1% | Auto | Red flashes 3×, then off | — |
Factory reset | Hold Power 10s | Red/blue alternate 3×, then off | 2 long |
FCC compliance
This device complies with Part 15 of the FCC Rules. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.